JCK: Why a Few Lab-Grown Diamonds Temporarily Change Color
Laura Sipe couldn’t believe her eyes. In February, the owner of J.C. Sipe Jewelers in Indianapolis was readying an I-color lab-grown diamond for a customer. She had always heard that lab-growns fluoresce differently under ultraviolet light, so she decided to take out her UV lamp and check for herself.
When she removed the stone, it was no longer an I. It was gray. And she “freaked out.”
She called up her vendor, who was just as surprised. “One person in the office said she had heard of something like this. She said the diamond turned purple and then it reverted back.”
Sipe’s diamond indeed returned to its original color the next day. She still told the vendor to take it back.
If a customer saw that, “that would freak everyone out,” she says. “Including us.” She hasn’t had that happen to any stone since.
What brings this up is this week’s announcement that Gemological Science International saw something similar at its lab this summer.
A 2 ct. diamond grown with the chemical vapor deposition (CVD) method transformed from near-colorless to slightly blue (pictured) after a few minutes’ exposure to short-wave UV radiation in a DiamondView machine.
“It was a dramatic change,” says chief information officer Nicholas DelRe. “I thought I was seeing things.”
The diamond retained the blue tinge when it was tucked into parcel papers and only returned to its original hue after two and a half hours in the sun. (Typically, the color reverts after about a half hour of exposure to sunlight.)
While GSI’s announcement caused a bit of a stir, it’s long been known that some CVD diamonds will temporarily change color under the “right” conditions. A 2010 Gems & Gemology article reported that the “color of as-grown [non-treated] CVD synthetic diamond gemstones may not be stable,” and that, if subject to ultraviolet radiation or high temperatures, “as-grown CVDs can show large, reversible changes in color.” It notes that these changes don’t cause any structural damage, and adds that, with exposure to sunlight, the stone will return to its original look.
Some CVD diamonds “display a slight brownish appearance, which can take on a bluish or grayish coloration after they are exposed to UV radiation. This color change can be reversed to the brownish appearance if the diamond is exposed to light.”
The GSI diamond turning blue was likely sparked by an optical defect involving silicon, a common impurity in CVD diamonds. This kind of color change may be disconcerting, but it is not common.
The unstable color is related to concentrations of some specific unstable optical centers in as-grown CVD diamonds. Usually, the concentration is low, so the effect on color is not obvious.
In addition, many CVD diamonds are treated with high-pressure high-temperature (HPHT), which eliminates the defects and stabilizes the color. At the root, the issue is a difference in how mined and certain lab-created diamonds form.
Natural diamonds grow in an almost perfect environment, deep inside the Earth, and we are trying to mimic that. CVD is usually low-pressure high-temperature. There is enough pressure that it crystallizes the diamond, but it is not exactly the same.
“From what we have seen, this [diamond] was an extreme case,” GSI says.
Still, it’s important that CVDs be graded in a consistent atmosphere. GSI places them in a full-spectrum light box for 30 minutes before grading. It’s possible that a small number of CVDs might change color when worn at a sunny beach or exposed to a black light at a nightclub,
although this may be more of an assumption.
Jewelers ought to become educated as to what may or may not happen. They should make sure they do not have their lab-grown stones and jewelry next to a UV light source. Also, it would be a good idea for jewelers to their have lab-grown jewelry exposed to direct daylight lighting in a light box at least once before putting it out on display, just to be on the safe side.
While these episodes provide a fascinating topic for research, consumers and traders shouldn’t worry too much about them, given that they are reversible and require very specific circumstances to occur.
A light source such as the sun, even though emitting UV, also emits the visible wavelengths that compete with the UV to restore the color to its ‘ambient’ state. The color changes that are observed in a lab where only UV is present will be quite different to real world lighting where white light is present simultaneously with any UV. The changes arising from UV exposure should be minimal under any conventional illumination that includes a large component of white light.
Photochromism, as it’s called, isn’t limited to lab-growns. Certain ultra-rare natural diamonds, dubbed “chameleons,” also change color. These fancy colored gems typically morph from green or yellow to orange or brown and back again.
One big difference: Chameleons switch their look when kept in the dark. CVDs do not.
Top: The diamond’s bluish tinge after it was placed in the DiamondView (Image courtesy of Gemological Science International)
Article previously published in JCK
About The Author
Debbie Azar is the Co-Founder and President of Gemological Science International (GSI), one of the largest gemological organizations in the world, and a distinguished leader in the global diamond and jewelry industry. As an executive with extensive knowledge of the jewelry and gem lab industries, her entrepreneurial skills and vision have helped GSI achieve rapid and continuous growth worldwide, establishing 13 leading-edge gemological facilities on four continents. She currently serves on the boards of the Jewelers Vigilance Committee, Responsible Jewellery Council, and Jewelers for Children, and is a member of the 24 Carat Club of New York. She has been featured in Forbes, Daily Mail, Good Morning America, Bloomberg, Bloomberg Businessweek, Fox Business, Fox5, CBS2, BOLDTV, Varney&Co, The Street, and NASDAQ, among others.